annotations: []
nodes:
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3102 bytes
          !
          ! Last configuration change at 09:35:29 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Host1
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to CE R1 **
           ip address 192.168.1.1 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 192.168.1.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n0
    image_definition: null
    label: Host1
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -760
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3668 bytes
          !
          ! Last configuration change at 09:35:18 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R1
          !
          boot-start-marker
          boot-end-marker
          !
          !
          vrf definition Gold
           rd 1:1
           !
           address-family ipv4
           exit-address-family
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to Host1 **
           no ip address
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/0.1
           description ** to Host1 in VRF Gold (VLAN 1) **
           encapsulation dot1Q 1 native
           vrf forwarding Gold
           ip address 192.168.1.2 255.255.255.0
          !
          interface GigabitEthernet0/1
           description ** to PE R2 **
           no ip address
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1.10
           description ** to PE R2 in VRF Gold **
           encapsulation dot1Q 10
           vrf forwarding Gold
           ip address 10.0.1.2 255.255.255.252
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router bgp 65001
           bgp router-id 1.1.1.1
           bgp log-neighbor-changes
           !
           address-family ipv4 vrf Gold
            network 192.168.1.0
            neighbor 10.0.1.1 remote-as 65010
            neighbor 10.0.1.1 activate
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n1
    image_definition: null
    label: R1
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -760
    y: -40
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 4520 bytes
          !
          ! Last configuration change at 09:35:16 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R2
          !
          boot-start-marker
          boot-end-marker
          !
          !
          vrf definition Gold
           rd 65010:1
           !
           address-family ipv4
            import map RM-IMPORT-MAP
            route-target export 65010:1
            route-target import 65010:2
            route-target import 65010:3
           exit-address-family
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          mpls label range 200 299
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 2.2.2.2 255.255.255.255
          !
          interface GigabitEthernet0/0
           description ** to CE R1 **
           no ip address
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/0.10
           description ** to CE R1 in VRF Gold **
           encapsulation dot1Q 10
           vrf forwarding Gold
           ip address 10.0.1.1 255.255.255.252
          !
          interface GigabitEthernet0/1
           description ** to R3 **
           ip address 10.1.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router isis
           net 49.0010.0000.0000.0002.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          router bgp 65010
           bgp router-id 2.2.2.2
           bgp log-neighbor-changes
           bgp scan-time 5
           neighbor 8.8.8.8 remote-as 65010
           neighbor 8.8.8.8 update-source Loopback10
           !
           address-family vpnv4
            neighbor 8.8.8.8 activate
            neighbor 8.8.8.8 send-community both
           exit-address-family
           !
           address-family ipv4 vrf Gold
            network 10.0.1.0 mask 255.255.255.252
            neighbor 10.0.1.2 remote-as 65001
            neighbor 10.0.1.2 activate
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          !
          ip prefix-list PL-IMPORT-MAP seq 5 permit 172.16.1.0/24
          ip prefix-list PL-IMPORT-MAP seq 10 permit 192.168.2.0/24
          ip prefix-list PL-IMPORT-MAP seq 15 deny 0.0.0.0/0 le 32
          ipv6 ioam timestamp
          !
          route-map RM-IMPORT-MAP permit 10
           match ip address prefix-list PL-IMPORT-MAP
          !
          route-map RM-IMPORT-MAP deny 20
          !
          !
          mpls ldp router-id Loopback10 force
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n2
    image_definition: null
    label: R2
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -760
    y: -160
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3557 bytes
          !
          ! Last configuration change at 09:34:52 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R3
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          mpls label range 300 399
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 3.3.3.3 255.255.255.255
          !
          interface GigabitEthernet0/0
           description ** to PE R2 **
           ip address 10.1.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/1
           description ** to R4 **
           ip address 10.2.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router isis
           net 49.0010.0000.0000.0003.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          mpls ldp router-id Loopback10 force
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n3
    image_definition: null
    label: R3
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -760
    y: -280
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3102 bytes
          !
          ! Last configuration change at 09:35:39 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Host2
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to CE R6 **
           ip address 192.168.2.1 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 192.168.2.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n4
    image_definition: null
    label: Host2
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -560
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3668 bytes
          !
          ! Last configuration change at 09:35:33 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R6
          !
          boot-start-marker
          boot-end-marker
          !
          !
          vrf definition Gold
           rd 1:1
           !
           address-family ipv4
           exit-address-family
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to Host2 **
           no ip address
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/0.1
           description ** to Host2 in VRF Gold (VLAN 1) **
           encapsulation dot1Q 1 native
           vrf forwarding Gold
           ip address 192.168.2.2 255.255.255.0
          !
          interface GigabitEthernet0/1
           description ** to PE R5 **
           no ip address
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1.10
           description ** to PE R5 in VRF Gold **
           encapsulation dot1Q 10
           vrf forwarding Gold
           ip address 10.0.2.2 255.255.255.252
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router bgp 65002
           bgp router-id 6.6.6.6
           bgp log-neighbor-changes
           !
           address-family ipv4 vrf Gold
            network 192.168.2.0
            neighbor 10.0.2.1 remote-as 65010
            neighbor 10.0.2.1 activate
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n5
    image_definition: null
    label: R6
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -560
    y: -40
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 4189 bytes
          !
          ! Last configuration change at 09:35:13 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R5
          !
          boot-start-marker
          boot-end-marker
          !
          !
          vrf definition Gold
           rd 65010:2
           !
           address-family ipv4
            route-target export 65010:2
            route-target import 65010:1
            route-target import 65010:3
           exit-address-family
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          mpls label range 500 599
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 5.5.5.5 255.255.255.255
          !
          interface GigabitEthernet0/0
           description ** to CE R6 **
           no ip address
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/0.10
           description ** to CE R6 in VRF Gold **
           encapsulation dot1Q 10
           vrf forwarding Gold
           ip address 10.0.2.1 255.255.255.252
          !
          interface GigabitEthernet0/1
           description ** to R4 **
           ip address 10.3.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router isis
           net 49.0010.0000.0000.0005.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          router bgp 65010
           bgp router-id 5.5.5.5
           bgp log-neighbor-changes
           neighbor 8.8.8.8 remote-as 65010
           neighbor 8.8.8.8 update-source Loopback10
           !
           address-family vpnv4
            neighbor 8.8.8.8 activate
            neighbor 8.8.8.8 send-community both
           exit-address-family
           !
           address-family ipv4 vrf Gold
            network 10.0.2.0 mask 255.255.255.252
            neighbor 10.0.2.2 remote-as 65002
            neighbor 10.0.2.2 activate
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          mpls ldp router-id Loopback10 force
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n6
    image_definition: null
    label: R5
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -560
    y: -160
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3682 bytes
          !
          ! Last configuration change at 09:34:55 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R4
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          mpls label range 400 499
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 4.4.4.4 255.255.255.255
          !
          interface GigabitEthernet0/0
           description ** to PE R5 **
           ip address 10.3.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/1
           description ** to R3 **
           ip address 10.2.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/2
           description ** to R7 **
           ip address 10.4.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router isis
           net 49.0010.0000.0000.0004.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          mpls ldp router-id Loopback10 force
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n7
    image_definition: null
    label: R4
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -560
    y: -280
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3673 bytes
          !
          ! Last configuration change at 09:34:53 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R7
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          mpls label range 700 799
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 7.7.7.7 255.255.255.255
          !
          interface GigabitEthernet0/0
           description ** to RR R8 **
           ip address 10.5.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/1
           description ** to R4 **
           ip address 10.4.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/2
           description ** to R9 **
           ip address 10.6.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router isis
           net 49.0010.0000.0000.0007.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          mpls ldp router-id Loopback10 force
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n8
    image_definition: null
    label: R7
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -360
    y: -280
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 4063 bytes
          !
          ! Last configuration change at 09:35:42 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R8
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 8.8.8.8 255.255.255.255
          !
          interface GigabitEthernet0/0
           description ** to R7 **
           ip address 10.5.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router isis
           net 49.0010.0000.0000.0008.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          router bgp 65010
           bgp router-id 8.8.8.8
           bgp log-neighbor-changes
           neighbor 2.2.2.2 remote-as 65010
           neighbor 2.2.2.2 update-source Loopback10
           neighbor 5.5.5.5 remote-as 65010
           neighbor 5.5.5.5 update-source Loopback10
           neighbor 10.10.10.10 remote-as 65010
           neighbor 10.10.10.10 update-source Loopback10
           !
           address-family vpnv4
            neighbor 2.2.2.2 activate
            neighbor 2.2.2.2 send-community extended
            neighbor 2.2.2.2 route-reflector-client
            neighbor 5.5.5.5 activate
            neighbor 5.5.5.5 send-community extended
            neighbor 5.5.5.5 route-reflector-client
            neighbor 10.10.10.10 activate
            neighbor 10.10.10.10 send-community extended
            neighbor 10.10.10.10 route-reflector-client
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n9
    image_definition: null
    label: R8
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -360
    y: -200
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3558 bytes
          !
          ! Last configuration change at 09:34:57 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R9
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          mpls label range 900 999
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 9.9.9.9 255.255.255.255
          !
          interface GigabitEthernet0/0
           description ** to PE R10 **
           ip address 10.7.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/1
           description ** to R7 **
           ip address 10.6.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router isis
           net 49.0010.0000.0000.0009.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          mpls ldp router-id Loopback10 force
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n10
    image_definition: null
    label: R9
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -160
    y: -280
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 4436 bytes
          !
          ! Last configuration change at 09:34:49 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R10
          !
          boot-start-marker
          boot-end-marker
          !
          !
          vrf definition SharedService
           rd 65010:3
           !
           address-family ipv4
            route-target export 65010:3
            route-target import 65010:1
            route-target import 65010:2
           exit-address-family
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          mpls label range 1000 1099
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 10.10.10.10 255.255.255.255
          !
          interface GigabitEthernet0/0
           description ** to CE R11 (Shared Service) **
           no ip address
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/0.10
           description ** to CE R11 in VRF SharedService **
           encapsulation dot1Q 10
           vrf forwarding SharedService
           ip address 10.0.3.1 255.255.255.252
          !
          interface GigabitEthernet0/1
           description ** to R9 **
           ip address 10.7.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           mpls ip
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router isis
           net 49.0010.0000.0000.0010.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          router bgp 65010
           bgp router-id 10.10.10.10
           bgp log-neighbor-changes
           neighbor 8.8.8.8 remote-as 65010
           neighbor 8.8.8.8 update-source Loopback10
           neighbor 10.0.3.2 remote-as 65003
           !
           address-family ipv4
            network 10.0.3.0 mask 255.255.255.252
            neighbor 8.8.8.8 activate
            neighbor 10.0.3.2 activate
           exit-address-family
           !
           address-family vpnv4
            neighbor 8.8.8.8 activate
            neighbor 8.8.8.8 send-community extended
           exit-address-family
           !
           address-family ipv4 vrf SharedService
            network 10.0.3.0 mask 255.255.255.252
            neighbor 10.0.3.2 remote-as 65003
            neighbor 10.0.3.2 activate
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          mpls ldp router-id Loopback10 force
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n11
    image_definition: null
    label: R10
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -160
    y: -160
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3816 bytes
          !
          ! Last configuration change at 09:35:13 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R11
          !
          boot-start-marker
          boot-end-marker
          !
          !
          vrf definition SharedService
           rd 1:1
           !
           address-family ipv4
           exit-address-family
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to PE R10 **
           no ip address
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/0.10
           description ** to PE R10 in VRF SharedService **
           encapsulation dot1Q 10
           vrf forwarding SharedService
           ip address 10.0.3.2 255.255.255.252
          !
          interface GigabitEthernet0/1
           description ** to Server1 **
           vrf forwarding SharedService
           ip address 172.16.1.2 255.255.255.0
           duplex auto
           speed auto
          !
          interface GigabitEthernet0/2
           description ** to Server2 **
           vrf forwarding SharedService
           ip address 172.16.2.2 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           description ** to Server3 **
           vrf forwarding SharedService
           ip address 172.16.3.2 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          router bgp 65003
           bgp router-id 10.1.1.1
           bgp log-neighbor-changes
           !
           address-family ipv4 vrf SharedService
            network 172.16.1.0 mask 255.255.255.0
            network 172.16.2.0 mask 255.255.255.0
            network 172.16.3.0 mask 255.255.255.0
            neighbor 10.0.3.1 remote-as 65010
            neighbor 10.0.3.1 activate
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n12
    image_definition: null
    label: R11
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -160
    y: -40
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3074 bytes
          !
          ! Last configuration change at 09:35:49 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Server1
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           ip address 172.16.1.1 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 172.16.1.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n13
    image_definition: null
    label: Server1
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -320
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3074 bytes
          !
          ! Last configuration change at 09:36:06 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Server2
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           ip address 172.16.2.1 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 172.16.2.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n14
    image_definition: null
    label: Server2
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -240
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3074 bytes
          !
          ! Last configuration change at 09:36:06 UTC Wed May 21 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Server3
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           ip address 172.16.3.1 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 172.16.3.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n15
    image_definition: null
    label: Server3
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -160
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
links:
  - id: l0
    n1: n0
    n2: n1
    i1: i1
    i2: i1
    conditioning: {}
    label: Host1-GigabitEthernet0/0<->R1-GigabitEthernet0/0
  - id: l1
    n1: n4
    n2: n5
    i1: i1
    i2: i1
    conditioning: {}
    label: Host2-GigabitEthernet0/0<->R6-GigabitEthernet0/0
  - id: l2
    n1: n1
    n2: n2
    i1: i2
    i2: i1
    conditioning: {}
    label: R1-GigabitEthernet0/1<->R2-GigabitEthernet0/0
  - id: l3
    n1: n5
    n2: n6
    i1: i2
    i2: i1
    conditioning: {}
    label: R6-GigabitEthernet0/1<->R5-GigabitEthernet0/0
  - id: l4
    n1: n2
    n2: n3
    i1: i2
    i2: i1
    conditioning: {}
    label: R2-GigabitEthernet0/1<->R3-GigabitEthernet0/0
  - id: l5
    n1: n6
    n2: n7
    i1: i2
    i2: i1
    conditioning: {}
    label: R5-GigabitEthernet0/1<->R4-GigabitEthernet0/0
  - id: l6
    n1: n11
    n2: n10
    i1: i2
    i2: i1
    conditioning: {}
    label: R10-GigabitEthernet0/1<->R9-GigabitEthernet0/0
  - id: l7
    n1: n3
    n2: n7
    i1: i2
    i2: i2
    conditioning: {}
    label: R3-GigabitEthernet0/1<->R4-GigabitEthernet0/1
  - id: l8
    n1: n9
    n2: n8
    i1: i1
    i2: i1
    conditioning: {}
    label: R8-GigabitEthernet0/0<->R7-GigabitEthernet0/0
  - id: l9
    n1: n8
    n2: n7
    i1: i2
    i2: i3
    conditioning: {}
    label: R7-GigabitEthernet0/1<->R4-GigabitEthernet0/2
  - id: l10
    n1: n10
    n2: n8
    i1: i2
    i2: i3
    conditioning: {}
    label: R9-GigabitEthernet0/1<->R7-GigabitEthernet0/2
  - id: l11
    n1: n12
    n2: n11
    i1: i1
    i2: i1
    conditioning: {}
    label: R11-GigabitEthernet0/0<->R10-GigabitEthernet0/0
  - id: l12
    n1: n13
    n2: n12
    i1: i1
    i2: i2
    conditioning: {}
    label: Server1-GigabitEthernet0/0<->R11-GigabitEthernet0/1
  - id: l13
    n1: n14
    n2: n12
    i1: i1
    i2: i3
    conditioning: {}
    label: Server2-GigabitEthernet0/0<->R11-GigabitEthernet0/2
  - id: l14
    n1: n15
    n2: n12
    i1: i1
    i2: i4
    conditioning: {}
    label: Server3-GigabitEthernet0/0<->R11-GigabitEthernet0/3
lab:
  description: ''
  notes: ''
  title: MPLS L3VPN Shared Service VRF
  version: 0.2.2
