annotations:
  - border_color: '#00000000'
    border_style: ''
    color: '#000000'
    rotation: 0
    text_bold: false
    text_content: |-
      R4 is the Bootstrap Router (BSR)
      R5 is the Rendezvous Point (RP)
      R1 is the First Hop Router (FHR)
      R8 is the Last Hop Router (LHR)

      You can test by pinging from the Source.

      Source#ping 239.0.0.1 re 3
      Type escape sequence to abort.
      Sending 3, 100-byte ICMP Echos to 239.0.0.1, timeout is 2 seconds:

      Reply to request 0 from 192.168.2.1, 6 ms
      Reply to request 1 from 192.168.2.1, 5 ms
      Reply to request 2 from 192.168.2.1, 6 ms
    text_font: monospace
    text_italic: false
    text_size: 15
    text_unit: pt
    thickness: 1
    type: text
    x1: -400.0
    y1: 240.0
    z_index: 1
  - border_color: '#808080FF'
    border_radius: 0
    border_style: ''
    color: '#F8F8F8'
    thickness: 1
    type: rectangle
    x1: -440.0
    y1: 200.0
    x2: 800.0
    y2: 480.0
    z_index: 0
nodes:
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3119 bytes
          !
          ! Last configuration change at 17:27:41 UTC Sat Jun 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Source
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to R1 **
           ip address 192.168.1.1 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 192.168.1.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n0
    image_definition: null
    label: Source
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -400
    y: 120
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3489 bytes
          !
          ! Last configuration change at 17:27:38 UTC Sat Jun 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R1
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip multicast-routing
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to Multicast Source **
           ip address 192.168.1.2 255.255.255.0
           ip pim bsr-border
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           description ** to R2 **
           ip address 10.0.1.1 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          !
          router eigrp EXAMPLE-EIGRP
           !
           address-family ipv4 unicast autonomous-system 10
            !
            af-interface GigabitEthernet0/0
             passive-interface
            exit-af-interface
            !
            topology base
            exit-af-topology
            network 10.0.1.0 0.0.0.3
            network 192.168.1.0
            eigrp router-id 1.1.1.1
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n1
    image_definition: null
    label: R1
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -280
    y: 120
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3381 bytes
          !
          ! Last configuration change at 17:27:41 UTC Sat Jun 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R2
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip multicast-routing
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to R1 **
           ip address 10.0.1.2 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           description ** to R3 **
           ip address 10.0.2.1 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          !
          router eigrp EXAMPLE-EIGRP
           !
           address-family ipv4 unicast autonomous-system 10
            !
            topology base
            exit-af-topology
            network 10.0.1.0 0.0.0.3
            network 10.0.2.0 0.0.0.3
            eigrp router-id 2.2.2.2
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n2
    image_definition: null
    label: R2
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -160
    y: 120
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3548 bytes
          !
          ! Last configuration change at 17:27:41 UTC Sat Jun 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R3
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip multicast-routing
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to R2 **
           ip address 10.0.2.2 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           description ** to R5 **
           ip address 10.0.4.1 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           description ** to R6 **
           ip address 10.0.6.1 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           description ** to R4**
           ip address 10.0.3.1 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          !
          router eigrp EXAMPLE-EIGRP
           !
           address-family ipv4 unicast autonomous-system 10
            !
            topology base
            exit-af-topology
            network 10.0.2.0 0.0.0.3
            network 10.0.3.0 0.0.0.3
            network 10.0.4.0 0.0.0.3
            network 10.0.6.0 0.0.0.3
            eigrp router-id 3.3.3.3
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n3
    image_definition: null
    label: R3
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -160
    y: 0
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3621 bytes
          !
          ! Last configuration change at 17:27:41 UTC Sat Jun 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R5
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip multicast-routing
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 5.5.5.5 255.255.255.255
           ip pim sparse-mode
          !
          interface GigabitEthernet0/0
           description ** to R3 **
           ip address 10.0.4.2 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           description ** to R6 **
           ip address 10.0.5.2 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          !
          router eigrp EXAMPLE-EIGRP
           !
           address-family ipv4 unicast autonomous-system 10
            !
            topology base
            exit-af-topology
            network 5.5.5.5 0.0.0.0
            network 10.0.4.0 0.0.0.3
            network 10.0.5.0 0.0.0.3
            eigrp router-id 5.5.5.5
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip pim rp-candidate Loopback10 group-list ACL-EXAMPLE-GROUP priority 100
          !
          ip access-list standard ACL-EXAMPLE-GROUP
           permit 239.0.0.1
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n4
    image_definition: null
    label: R5
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -40
    y: -80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3465 bytes
          !
          ! Last configuration change at 17:27:40 UTC Sat Jun 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R6
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip multicast-routing
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to R7 **
           ip address 10.0.7.2 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           description ** to R5 **
           ip address 10.0.5.1 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           description ** to R3 **
           ip address 10.0.6.2 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          !
          router eigrp EXAMPLE-EIGRP
           !
           address-family ipv4 unicast autonomous-system 10
            !
            topology base
            exit-af-topology
            network 10.0.5.0 0.0.0.3
            network 10.0.6.0 0.0.0.3
            network 10.0.7.0 0.0.0.3
            eigrp router-id 6.6.6.6
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n5
    image_definition: null
    label: R6
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: 80
    y: 0
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3381 bytes
          !
          ! Last configuration change at 17:27:41 UTC Sat Jun 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R7
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip multicast-routing
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to R8 **
           ip address 10.0.8.2 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           description ** to R6 **
           ip address 10.0.7.1 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          !
          router eigrp EXAMPLE-EIGRP
           !
           address-family ipv4 unicast autonomous-system 10
            !
            topology base
            exit-af-topology
            network 10.0.7.0 0.0.0.3
            network 10.0.8.0 0.0.0.3
            eigrp router-id 7.7.7.7
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n6
    image_definition: null
    label: R7
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: 80
    y: 120
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3491 bytes
          !
          ! Last configuration change at 17:27:41 UTC Sat Jun 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R8
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip multicast-routing
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to Multicast Receiver **
           ip address 192.168.2.2 255.255.255.0
           ip pim bsr-border
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           description ** to R7 **
           ip address 10.0.8.1 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          !
          router eigrp EXAMPLE-EIGRP
           !
           address-family ipv4 unicast autonomous-system 10
            !
            af-interface GigabitEthernet0/0
             passive-interface
            exit-af-interface
            !
            topology base
            exit-af-topology
            network 10.0.8.0 0.0.0.3
            network 192.168.2.0
            eigrp router-id 8.8.8.8
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n7
    image_definition: null
    label: R8
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: 200
    y: 120
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3151 bytes
          !
          ! Last configuration change at 17:27:42 UTC Sat Jun 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Receiver
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to R8 **
           ip address 192.168.2.1 255.255.255.0
           ip igmp join-group 239.0.0.1
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 192.168.2.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n8
    image_definition: null
    label: Host
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: 320
    y: 120
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3532 bytes
          !
          ! Last configuration change at 17:27:41 UTC Sat Jun 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R4
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip multicast-routing
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 4.4.4.4 255.255.255.255
           ip pim sparse-mode
          !
          interface GigabitEthernet0/0
           description ** to R3 **
           ip address 10.0.3.2 255.255.255.252
           ip pim sparse-mode
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          !
          router eigrp EXAMPLE-EIGRP
           !
           address-family ipv4 unicast autonomous-system 10
            !
            topology base
            exit-af-topology
            network 4.4.4.4 0.0.0.0
            network 10.0.3.0 0.0.0.3
            eigrp router-id 4.4.4.4
           exit-address-family
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip pim bsr-candidate Loopback10 0 100 accept-rp-candidate ACL-EXAMPLE-RP
          !
          ip access-list standard ACL-EXAMPLE-RP
           permit 5.5.5.5
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n9
    image_definition: null
    label: R4
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -240
    y: -80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
links:
  - id: l0
    n1: n0
    n2: n1
    i1: i1
    i2: i1
    conditioning: {}
    label: Source-GigabitEthernet0/0<->R1-GigabitEthernet0/0
  - id: l1
    n1: n1
    n2: n2
    i1: i2
    i2: i1
    conditioning: {}
    label: R1-GigabitEthernet0/1<->R2-GigabitEthernet0/0
  - id: l2
    n1: n8
    n2: n7
    i1: i1
    i2: i1
    conditioning: {}
    label: Host-GigabitEthernet0/0<->R8-GigabitEthernet0/0
  - id: l3
    n1: n7
    n2: n6
    i1: i2
    i2: i1
    conditioning: {}
    label: R8-GigabitEthernet0/1<->R7-GigabitEthernet0/0
  - id: l4
    n1: n2
    n2: n3
    i1: i2
    i2: i1
    conditioning: {}
    label: R2-GigabitEthernet0/1<->R3-GigabitEthernet0/0
  - id: l5
    n1: n6
    n2: n5
    i1: i2
    i2: i1
    conditioning: {}
    label: R7-GigabitEthernet0/1<->R6-GigabitEthernet0/0
  - id: l6
    n1: n3
    n2: n4
    i1: i2
    i2: i1
    conditioning: {}
    label: R3-GigabitEthernet0/1<->R5-GigabitEthernet0/0
  - id: l7
    n1: n5
    n2: n4
    i1: i2
    i2: i2
    conditioning: {}
    label: R6-GigabitEthernet0/1<->R5-GigabitEthernet0/1
  - id: l8
    n1: n3
    n2: n5
    i1: i3
    i2: i3
    conditioning: {}
    label: R3-GigabitEthernet0/2<->R6-GigabitEthernet0/2
  - id: l9
    n1: n3
    n2: n9
    i1: i4
    i2: i1
    conditioning: {}
    label: R3-GigabitEthernet0/3<->R4-GigabitEthernet0/0
lab:
  description: ''
  notes: ''
  title: PIM Sparse Mode with Bootstrap RP
  version: 0.2.2
